Complete solution for automated identification

Brady BSP61 For full-automted labelling along production lines

The BSP™61 Print and Apply System offers a fully automatic labelling solution anywhere along the production line. It combines a thermal transfer label printer with an automatic applicator and is designed to consistently print and accurately position and apply labels in almost manufacturing applications. The BSP61 combines precision, versatility and high print quality and offers best value for money.

The use of high-performance equipment for labelling in a production environment maximises efficiency by enabling first-time clean, clear and accurate labelling, steamlined traceability, reducing material wastage, maintaining uptime and measuring WIP. The result? A reduction of each unit´s total production cost.

THe BSP™61 Print and Apply System is developed for applications such as PCB marking, component and product marking in high quality demanding industries like automotive, electronics, manufacturing and laboratory. Designed for optimum, easy integration into existing prodcution lines, the BSP61  has a compact footprint and offers a software that is compatible with your host system.

Brady i7100 with vial label applicator High-Performance printer with vial label applicator

With the high-performance printer i7100 from Brady and the fitting vial label applicator you can optimise identification in laboratories.

The automated identification happens in two steps:

• Fast and high-quaity label print and
• automated, precise application of the label on the vial

Afterwards the vials can be removed manually or they are collected in a separat fixed tray of the Brady i7100.

Following vials can be marked:

• Diameter: 10 mm up to 17 mm
• Length: 38 mm up to 105 mm

Vials with and without cap can be labelled.

Brady Wraptor A6500 Fast identification of cables and lines

The printing applicator Wraptor A6500 from Brady supports you in people- and time-intensive production steps and increases the quality of identification.

It prints 2D and 1D (linear) codes with a resolution of 300 dpi in high quality and applies them automated on lines and cables. The mounting on the particular line happens very tight with a minimum of spiral-, blister- or wrinkleformations.

The diameter of the cable should be between 1,52 mm and 15,24 mm. Die label width must be between 6,35 mm up to 50,80 mm - the label length from 19,05 mm up to 76,20 mm.

The memory capacity can additionally be extended from 32 GB with USB.

BradyPrinter A5500 Precise cable marking within 5 seconds

With the flag-print applicator A5500 from Brady you combine two work steps in one: precise printing with a resolution of up to 200 dpi and fast apply.

The cables can have diameter from 1,52 up to 15,24 mm. The labels can have a width from 25,40 up to 50,8 mm and a length from 19,05 up to 101,60 mm. The printing speed is up to 76,20 (mm/sec.).

Thanks to a modern user interface with a colour-touchscreen and the simple system integration the Brady A5500 is very user-friendly and easy to handle in dialy applications. 

See for yourself and get to know the huge efficiency enhancement in your industrial processes!

Applications	Cable marking
Weight (kg)	34
Measuers (mm)	Width: 107 x Depth: 106 x Length: 328
Memory	32 GB
Display	Colour-Touchscreen
Colour print	one-coloured
Resolution (dpi)	300
Printing speed (mm/sec)	76,20
Min. Label width (mm)	25,40
Max. Label width (mm)	50,80
Max. Print width (mm)	50,80
Max. Print length (mm)	101,60
Min. Cable diameter (mm)	1,524
Max. Cable diameter (mm)	15,24
Connection options	Ethernet, USB, WiFi

 

CAB AXON 1 Quick and reliable identification of small tubes (⌀ 10 to 35 mm)

The print- and dispensing system Axon 1 from cab is on the one hand a hand-work-place for the labelling of single tubes or on the other hand suitable for the integration of consisting sample processing systems.

With the Axon 1 tubes with or without cap and a diameter from 10 up to 35 mm ca nbe printed, whereas the complete label process per tube is less than 2 seconds. Due to a resolution of 300 resp. 600 dpi codes with an exact edge definition can be printed - therefore even smallest 2D-codes with high quality can be printed.

Additionally it can be chosen between thermaldirect- or thermal transfer print.

CAB AXON 2 Quick and reliable identification of small tubes (⌀ 10 to 20 mm)

The print- and dispensing system Axon 2 from cab is on the one hand a hand-work-place for the labelling of single tubes or on the other hand suitable for the integration of consisting sample processing systems.

With the Axon 2 tubes with or without cap and a diameter from 10 up to 20 mm ca nbe printed, whereas the complete label process per tube is less than 2 seconds. Due to a resolution of 300 resp. 600 dpi codes with an exact edge definition can be printed - therefore even smallest 2D-codes with high quality can be printed.

Additionally it can be chosen between thermaldirect- or thermal transfer print.

CAB Hermes Q Automated print-dispenser-system for applications in demanding industrial environments

Due to its robust design and the solid metal case the print-dispensing-system Hermes Q from cab has been produced for demanding industrial applications around-the-clock.

The cover a huge amount of application fields the Hermes Q is available in different model versions:

• the slim one - to print small labels
• the universal one - offering a wide range of accessoires
• the wide one - to print Odette-, UCC- and GS1 labels in logistic applications

Fields of application can be: PCB labeling, package labeling or container labeling

Additionally the Hermes Q convinces with its perfect print accuracy: Due to the adjustable slip correction the print offset can be reduced by ± 0,2 mm.

Also the Hermes Q is characterized by its user-friendliness:

• Intuitiv, simple handling
• Fast change of transfer films, print heads or press cylinders

CAB Hermes+ For an exact and precise label positioning in demanding industrial environments

No matter which position – Hermes+ prints and dispenses

CAB applicators have been specially developed for the fully automated printing and labelling in production- and assembly lines. Therefore the applicator distinguishes itself by the precise label-positioning and the robust construction.
Consequently these systems are applicable for demanding industrial operations.

Specifications
Print method	Thermal transfer / Thermal direct
Max. Print speed	Hermes +2 (300 / 600 dpi): Hermes +4 (203 / 300 / 600 dpi): Hermes +4.3 (203 / 300 dpi):	150/100 mm/s 250/250/100 mm/s 200/150 mm/s
Resolution	Hermes +2: 300 / 600 dpi Hermes +4: 203 / 300 / 600 dpi Hermes +4.3: 203 / 300 dpi
Memory (standard / max.)	(RAM) MB: 64 Memory IFFS MB Flash: 8
Label width (min. max.)	Hermes +2: Hermes +4 / Hermes +4.3:	10 - 61 mm 10 - 114 mm
Print width up to mm	Hermes +2 (300 / 600 dpi): Hermes +4 (203 / 300 / 600 dpi): Hermes +4.3 (203 / 300):	54,2/57 mm 104/105,6/105,6 mm 104/108,4 mm
Ribbon core diameter	25 mm
Ribbon widths	Hermes +2:  Hermes +4 / Hermes +4.3	60 mm 114 mm
Core diameter	25 mm
Communication interfaces	Centronics bi-directional acc. IEEE 1284 (optional) RS232 C 1.200 up to 230.400 Baud / 8 Bit, USB 2.0 High Speed Slave fpr PC-connection, Ethernet 10/100 Base T, LPD, RawIP-Printing, ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP, RS422, RS485 1.200 up to 230.400 Baud/8 Bit (optional), WLAN card 802.11 b/g WEP/WPA PSK (TKIP) (optional), 2 x USB Master for external option panel, keyboard, scanner, service key, Connection for warning light, Digital I/O interface, cab applicator connection, connection for external emergency stop, Connection for compresed air
Dimension (B x T x H)	Hermes +2: Hermes +4: Hermes +4.3:	400 x 400 x 200 mm 400 x 400 x 255 mm 538 x 518 x 255 mm
Weight	Hermes +2: Hermes +4: Hermes +4.3:	15 kg 16 kg 17 kg

CAB Hermes C For two-coloured printing and dispensing in real-time

The world´s first Innovation: Hermes C for two-color print and apply

Labels are printed and dispensed in real-time - without loss of material (even with single Labels) - by means of two in-line arranged print Units.
Additionally the ribbon saver at print head 1 reduces ribbon consumption.

Hermes C is compatible with the "classic" Hermes+ series.

The Hermes C has especially been designed for:
• Marking of chemicals and hazardous substances
• On drums, buckets, boxes and palettes according to GHS
• Designed for industrial application in production lines

 

Specifications
Print method	Thermal transfer
Max. Print Speed	125 mm/s
Resolution	300 dpi
Memory (standard / max.)	(RAM) MB: 64 Memory IFFS MB Flash: 8
Label width (min. max.)	46 - 176 mm
Print width up to mm	162,6 mm
Ribbon core diameter	25 mm
Ribbon widths	165 mm
Core diameter	25 mm
Communication Interfaces	RS232C 1,200 to 230,400 baud/8bit USB 2.0 highspeed slave for PC Ethernet 10/100 Base-T, LPD, RawIP printing, ftp printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, zeroconf, mDNS, SOAP
Dimension (B x T x H)	550 x 630 x 315
Weight	approx. 30 kg

CAB PX Q Functional, reliable and user-friendly: The perfect print- and dispense modul for demanding industrial applications

The PX Q print- and dispense modul from cab has especially been developed for full-automated printing and labeling in demanding industrial environments and manages even complex identification tasks. The implementation in consisting systems occurs very quick and easy and the integration is screw compatibel with other devices from competitors.

ThePX Q Modul itself convinces with a buckling resistant aluminium cast construction, which is the base for the installation of all modules of print mechanism. Specifically the PX Q modul has a food safe coating and a stainless steel covering.

The PX Q is available in two different versions:

• The universal one: industrial device for accurate imprint
• Thw wide one: Suitable for Odette and UCCC labels

CAB PX Full-automated printing and labelling in demanding industrial environments

The PX print- and dispensemodule from cab

The PX-module has especially been desinged for fully-automatic printing and labeling in demanding industrial envorinments. It prints and dispenses in every mounting position and can be integrated in every production line.

The print mechanic with its functional modules is mounted in a stable and torsion-resistant housing.

cab Wicon Wrap-around applicator for round objects with a diameter from 2 to 16 mm from cab

• The wrap-around applicator from cab identifies cylindrical objects with a diameter from 2 up to 16 mm
• The label field will be protected automatically with a transparent protective laminate, which increases durability
• The cycle time of one wrap is 1,8 up to 6 seconds
• The finger guard at the insertion- and removal opening offers protection during identification process

DYN-Flag Exact and second-by-second identification of cables and other round parts

Wire identification with the print applicator DYN-Flag -
Increased productivity and process reliability

The DYN-Flag offers exact and second-by-second identification with wires and other round parts

General information
The wire identification system DYN-Flag is an ideal combination of a thermal transfer printer and an application unit. This combination allows, with higher process reliability and constant high identification quality to realise valuable increase of productivity.

The system either can operate as stand-alone-tool or online in real-time and can be integrated in most of operative processes. Short changeover times and an easy handling show s high user-friendliness.

The label layout can be created via a graphical label production software. It is possible to save several layouts on the memory card of the printer.

Technical data
Print method	Thermal transfer
Resolution	300 dpi / 600 dpi
Speed of motor shaft	Max. 500 mm / sec.
Memory	Up to 14 programs
Electrical power supply	230 V / 50 Hz
Input power	1250W
Wire diamete / -minimum length	0,5 mm - 20 mm / 90 mm
Label role- core diameter	76 mm
Role-Outerdiameter	205 mm
Labelformat	15 x 50 mm 35 x 150 mm
Tool-cycle time	6-8 sec.
Repeat accuracy of the adhered labels	> +/-0,6 mm / +/-1mm
Interfaces standard	RS232 8bit; USB 2.0; Ethernet 10/100 Base T
Interfaces optional	Centronics nach IEEE 1284; RS422; RS485; WLAN802.11 b/g
Measures (BxHxT)	500 x 500 x 930
Sound	< 65dB
Degree of protection	IP30

DYN-Place Wrap Precise and fast identification of cables and other round parts

Wirde identification with the printing applicator DYN-Wrap -
Increased productivity and process reliability

The DYN-Wrap offers exact and second-by-second identification of wires and other round parts.

General information
The wire identification system is a combination of thermal transfer printing system and an application unit. This combination offers, by high process reliability and constant high identification quality to realise a valuable increase of productivity.

The label layout can be created via a graphical label production software. Sebeeral layouts can be saved on the memory card of the printer.

Technical data
Print method	Thermal transfer
Resolution	300 dpi / 600 dpi
Speed of the motor shaft	Max. 500 mm / sec.
Memory	up to 14 programs
Electrical power supply	230 V / 50 Hz
Input power	1250W
Wire diameter / -minimum length	3 mm - 20 mm / 90 mm
Label role-corediameter	40 - 76 mm
Role-Outerdiameter	210 mm
Labelformat	18 x 50 mm 30 x 100 mm 35 x 150 mm
Tool-cycle time	4-6 sec.
Repeatability of the adhered labels	up to < +/- 1 mm possible
Interfaces standard	RS232 8bit; USB 2.0; Ethernet 10/100 Base T
Interfaces optional	Centronics nach IEEE 1284; RS422; RS485; WLAN802.11 b/g
Measures (BxHxT)	500 x 500 x 1030
Sound	< 65dB
Protection class	IP30

SALP-460 High-speed label dispenser and multi-positioning labelling and sensing

The printer/applicator is cab Hermes+ series, one of the most advanced manufacturer in this field. It can apply labels at 0°, 90°, 180°, 270° with alternate content (PN/SN). Mechanical structure: X-Y- axis precise ball screw driven by servomotor. Positioning system: high definition camera to navigate and mark points, examine label position accuracy. This high-speed inline label placer offers multiple-position automatic labeling and scanning. The scanned data can be real-time uploaded to your system network.

SALPS-300 Print- and dispensing applicator with convincing price-performance ratio

The printer/applicator is cab Hermes+ series, one of the most advanced manufacturer in this field. It can apply labels at 0°, 90°, 180°, 270° with alternate content (PN/SN). Mechanical structure: X-Y- axis precise ball screw driven by servomotor. SALPS-300 can print/apply labels and scan them, upload scanned data to working network fully automatically. It is the low cost version for this purpose and can meet the demand for real-time print & apply heat-resisting labels for PCB in SMT industry.

TSC PEX-1000 Series Reliable and robust print-dispense-system from TSC

• Robust and resistant die-cast casing for applications in demanding industrial environments
• High print speed of up to 457,2 mm
• Many interface possibilities: industrial standard GPIO, USB, parallel, serial, Ethernet
• Even very exact application of up to 5 mm thick labels
• Applications: identification, marking, signing, labelling
• Operation areas: Production, shipping, logistics, healthcare

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, ribbon core: 25,4mm, speed (max.): 356 mm/s, USB, RS232, parallel, Ethernet, TSPL, RAM: 512 MB, Flash: 512 MB, display (colour), real time clock, Black Mark Sensor, Gap Sensor, incl.: cable (USB), power supply unit, power cable, Treiber CD, QSG

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, ribbon core: 25,4mm, speed (max.): 356 mm/s, USB, RS232, parallel, Ethernet, TSPL, RAM: 512 MB, Flash: 512 MB, display (colour), real time clock, Black Mark Sensor, Gap Sensor, incl.: cable (USB), power supply unit, power cable, Treiber CD, QSG

Zebra ZE500 Series Reliable print-dispense-system from Zebra for demanding applications

• Easy maintenance - fast change of rolls and ribbons
• Fast integration in existing systems
• Robust full-metal industry-construction
• Applications: product labelling, labelling, marking
• Operation areas: production, automotive, pharma, food industry, healthcare

label printer (Print Engine), industrial printer (left hand version), thermal transfer, direct thermal, 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 104 mm, 305 mm/s, multi-interface (RS232, USB, parallel), print server (internal 10/100), ZPLII, real time clock, incl.: power cable, Treiber CD

label printer (Print Engine), industrial printer (right hand version), thermal transfer, direct thermal, 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 104 mm, 305 mm/s, multi-interface (RS232, USB, parallel), print server (internal 10/100), ZPLII, real time clock, incl.: power cable, Treiber CD

label printer (Print Engine), industrial printer (left hand version), thermal transfer, direct thermal, 8 dots/mm (203 dpi), media width (max.): 180 mm, print width (max.): 168 mm, 305 mm/s, multi-interface (RS232, USB, parallel), print server (internal 10/100), ZPLII, real time clock, incl.: power cable, Treiber CD

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 24 dots/mm (600 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 24 dots/mm (600 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID, incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID, incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID (reader, UHF), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 8 dots/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID (reader, UHF), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID (reader, UHF), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 114 mm, print width (max.): 104 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID (reader, UHF), incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID, incl.: power cable (EU, UK)

label printer (Print Engine), thermal transfer, 12 dots/mm (300 dpi), media width (max.): 180 mm, print width (max.): 168 mm, USB, RS232, Bluetooth, Ethernet, dual interface (USB), ZPL, display (colour), RFID, incl.: power cable (EU, UK)